BASIC INFO
Fisher FIELDVUE DVC6200 Digital Valve Controller DVC6200 Valve Positioner
Description of Fisher FIELDVUE DVC6200 Digital Valve Controller DVC6200 Valve Positioner
The Fisher Fieldvue DVC6200 Digital Valve Controller is microprocessor based current-to-pneumatic instruments with linkage-less, non-contact travel feedback. Traditional positioning of a control valve can be obtained by converting the 4-20mA DC input signal from the process controller to a pneumatic output signal to the actuator. The Controller can achieve automatic calibration and configuration using the power of microprocessor technology. The Controller has communication capability via the HART communications protocol to provide instrument and valve diagnostic information. The DVC6200 can be installed on sliding-stem, rotary, single or double acting actuators.
The Fisher FIELDVUE DVC6200 instrument allows for your operation to run closer to setpoint, improving product quality with more accurate control. Using FIELDVUE Performance Diagnostics, valve operation is monitored online to evaluate performance and reliability.
Specifications of Fisher FIELDVUE DVC6200 Digital Valve Controller DVC6200 Valve Positioner
Area Classification Explosion Proof, Intrinsically Safe, FISCO, Type N, Flame Proof, Non-incendive for FM
Certifications CSA, FM, ATEX, IECEx, CUTR, Lloyd's Register, Peso, KGS, INMETRO, NEPSI, TIIS, Natural Gas Certified, Single Seal Device
Communication Protocol HART® 4-20 mA
Data Interface Wired
Diagnostics Yes
Input Signal Electric
Max Outlet Pressure 145 psig
Mounting Type Integral Mounted
Operating Temperature Standard Temperature, High Temperature
Position Control Throttling Control, On/Off
Power Source Local
Process Control Flow, Pressure, Temperature, Level
Supply Media Air, Natural Gas, Nitrogen
Fisher FIELDVUE DVC6200 Digital Valve Controller DVC6200 Valve Positioner
The Fisher FIELDVUE DVC6200 instrument allows for your operation to run closer to setpoint, improving product quality with more accurate control. Using FIELDVUE Performance Diagnostics, valve operation is monitored online to evaluate performance and reliability.
The Fisher® Fieldvue™ DVC6200 Digital Valve Controller is a positioner that converts a 4-20mA control signal to a pneumatic output signal sent to an actuator on a control valve assembly. The controller provides quick responsiveness to changes in your process loop and precise control for set point changes and can detect position feedback problems and automatically revert to I/P transducer mode to keep the valve operational. The DVC6200 is configurable for sliding-stem valves, integral mounting to Fisher rotary actuators, and single- or double-acting actuators.
Fisher FIELDVUE DVC6200 Digital Valve Controller DVC6200 Valve Positioner
The FIELDVUE DVC6200 is a digital valve controller capable of operating using 4-20 mA, HART, Fieldbus, or Profibus communication protocols.
The basis of its operation is the conversion of a control signal into a pneumatic output controlling valve position. The DVC6200 uses linkageless, non-contacting technology for optimum valve positioning in the most reliable fashion with no wearing parts to maximize its lifecycle. The DVC6200 utilizes a modular design to easily replace critical components. Most components can be replaced in the field without replacing tubing or field wiring.
Fisher FIELDVUE DVC6200 Digital Valve Controller DVC6200 Valve Positioner
The DVC6200 offers value in best-in-class performance and valve diagnostics. With the option of the integral position transmitter, hardware costs can be reduced. By using this digital valve controller in an integrated control system, significant cost savings can be achieved through the use of proactive maintenance enabled by the use of Advanced and Performance diagnostics. These diagnostics allow for the monitoring of valve health and performance to maximize process uptime.
The DVC6200 can be mounted to most Fisher and non-Fisher pneumatic actuators and are interchangeable between different assemblies for minimizing spares requirements.
Features of Fisher FIELDVUE DVC6200 Digital Valve Controller DVC6200 Valve Positioner
• The high performance, linkage-less feedback system eliminates physical contact, which eliminates wearing on parts.
• The fully encapsulated electronics resist the effects of vibration, temperature, and corrosive atmospheres.
• Provides quick responsiveness to large step changes and precise control for small setpoint changes.
• The DVC6200 is a HART communicating device, so information can be accessed anywhere along the loop. This flexibility can reduce exposure to hazardous environments and make it easier to evaluate valves in hard to reach locations.
• The modular design allows critical working components to be replaced without removing field wiring or pneumatic tubing.
• When installed in an integrated control system, significant hardware and installation cost savings can be achieved.
• The self-diagnostic capability provides valve performance and health evaluation.
• Digital communication provides easy access to the condition of the valve.
We are specialized in intelligent instruments, including : control system, transmitters, flow meters,sensors, recorders, analyzers, control valves, controllers, PLC's, etc.
We mainly supply Yokogawa ,Honeywell,Siemens,ABB,FLUKE,Endress+Hauser,Schneider Electric,Moeller,FUJI,Omron,Pepperl+Fuchs,Hima,Yaskawa, Norgren, Hach, Weidmuller ,Phoenix,MTL,Testo etc.
Why choose us?
1. 100% original product, 100% quality assurance.
If you find a fake. Please contact us without hesitation! We afford the shipment cost! We send you a new product asking zero cent!
2. Varied payment methods.
We adopt T/T, western union and paypal. If you can not trust us , you can choose to pay it via Aliexpress! 100% make your money safe!
3.SHIPPING:
We can shipping all over the world.via DHL,UPS,Fedex,TNT and EMS etc., the packaging is very safe and strong. if you have any special needs,please notify me.
It will take 3 to 7days to reach in your hands.
Packaging:
Imported with original packaging or standard export packing.Customize design is acceptable.
Contact:
HONGKONG XIEYUAN TECH CO., LIMITED
Email:becky@hkxytech.com Web:www.hkxytech.com
Mobile:+86-15972186287(Whatsapp & Wechat)
We are specialized in intelligent instruments, including : control system, transmitters, flow meters,sensors, recorders, analyzers, control valves, controllers, PLC's, etc.
We mainly supply Yokogawa ,Honeywell,Siemens,ABB,FLUKE,Endress+Hauser,Schneider Electric,Moeller,FUJI,Omron,Pepperl+Fuchs,Hima,Yaskawa, Norgren, Hach, Weidmuller ,Phoenix,MTL,Testo etc.
Why choose us?
1. 100% original product, 100% quality assurance.
If you find a fake. Please contact us without hesitation! We afford the shipment cost! We send you a new product asking zero cent!
2. Varied payment methods.
We adopt T/T, western union and paypal. If you can not trust us , you can choose to pay it via Aliexpress! 100% make your money safe!
3.SHIPPING:
We can shipping all over the world.via DHL,UPS,Fedex,TNT and EMS etc., the packaging is very safe and strong. if you have any special needs,please notify me.
It will take 3 to 7days to reach in your hands.
Packaging:
Imported with original packaging or standard export packing.Customize design is acceptable.
Contact:
HONGKONG XIEYUAN TECH CO., LIMITED
Email:becky@hkxytech.com Web:www.hkxytech.com
Mobile:+86-15972186287(Whatsapp & Wechat)
